I spoke with RVS and the Replacement Wireless Antenna for RVS Wireless Backup Camera Systems part # RVS-WT03 is the correct replacement for the RVS Wireless Backup Camera System RVS-355W. view full answer...
For a two camera system, I recommend the Rear View Safety Backup Camera System, # RVS-770614-213.
The RVS system includes two cameras that will give you 130-degree viewing angle and up to 50 feet of inferred night vision. You can install one camera on your tow vehicle and the other at the rear of your RV. The camera kit will include all the wiring and connections needed to link the cameras to the 7 inch digital LCD color monitor that will mount in the cab of your tow vehicle.
I recommend... view full answer...
A second camera can come in a couple different forms I recommend for your system. The Rear View Safety Wireless Backup Camera - 130-Degree Viewing Angle, # RVS-DS1 is upgraded camera for the # RVS-2CAM system. However, the Rear View Safety Wireless Transmitter # RVS-DS can make any RVS wired camera function with the system. You should note this transmitter is not waterproof.
For instance, the Rear View Safety Backup Camera - Surface Mount, # RVS-776 can be used with that transmitter... view full answer...
I have an option for you but most of the monitors we carry come with a backup camera, which you didn't need. The Rear View Safety Side Camera # RVS-DSS-R and the # RVS-DSS-L will work with the # RVS-4CAM, but that would also include a backup camera.
The option I have for you is to build your own system with the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System # FR47FR and the LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2 # FCE48TASL.... view full answer...
I contacted RVS and The Replacement Wireless Antenna for RVS Wireless Backup Camera Systems - High Gain Male # RVS-WT03 will work with your RVS-355W camera. view full answer...
I may have a solution for you but I reached out to Rear View Safety about this and using 4 cameras requires the quad view camera, which does not come with the # RVS-770614-213.
For this reason, in order to use a 4 camera setup you'd need a new monitor like the Rear View Safety Backup Monitor - 7" Color Screen - Quad View # RVS-6137Q; you can use your two old cameras with this monitor and add new ones with the Replacement Backup Camera for Rear View Safety HD Backup Camera System # RVS-770-HD. view full answer...
The best option that we have, that will allow you to record the cameras is the Rear View Safety Wireless Backup Camera System # RVS-4CAM. This system has a 7" quad view display and built in DVR that accepts SD cards up to 128 GB for storing the recordings.
The Rear View Safety Wireless Backup Camera System # RVS-4CAM comes with 1 camera, but can support up to 4 cameras. Additional cameras can be added using the Rear View Safety 130-Degree Wireless Backup Camera # RVS-DS1. There are not... view full answer...
The Buyers Products RV Side Camera w/ Night Vision # BP68FR is an addition to complete your RV camera system. It is designed to be used with a back up camera system like the Buyers Products RV Backup Camera System # 3378883000, not as a stand alone camera.
The backup camera system comes with all of the parts necessary to install your camera to include the wiring harness needed to get power to your camera(s). The side camera has a sealed thread-and-collar 4-pin connector that runs to the... view full answer...
You ask a good question, one we get often, but sadly no, the aftermarket backup and observation camera systems we have are either all-inclusive with their own monitor or they use a smartphone as the display. No systems are meant to integrate into an RV's or a vehicle's in-dash display setup.
The camera systems that use your smartphone as the display appear on the linked page. These include the RVS system # RVS-83112-WiFi. All other types of cameras appear on the other linked page. Among... view full answer...
Thanks for the photo of your 2014 Landmark, and the answer to your question is yes, you can absolutely use the Furrion Vision S Wireless RV Camera System, with your choice of screen size:
- 4.3" Screen: Furrion Vision S Wireless RV Backup Camera System # FOS43TASF
- 5" Screen: Furrion Vision S Wireless RV Backup Camera System # FOS05TASF
You do not need to have your trailer pre-wired for use, it simply needs to be wired in; the pre-wired trailers simply already have that wiring present.... view full answer...
So the Weldex camera setup you have is discontinued and notoriously had bad connections on the wires and in the circuit boards of the cameras and monitors. There might be a way to adapt the wiring you have with a camera we have like the Rear View Safety Backup Camera System # RVS-062710 you referenced but since the wiring of the system you have is not reliable I would strongly recommend just starting over with an all new kit like the one you mentioned. view full answer...
The Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA57YR does not have currently have sidemarker-type cameras that are compatible with this specific system so you would need to purchase the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera # ASA64YR to add additional cameras. view full answer...
No, the 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR will not work with Haloview cameras.
You would need Furrion cameras. We do have Furrion camera kits that include just a back-up camera with monitor or kits that also include side cameras.
Back-up camera
- Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF
Back-up and Side camera
- Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 view full answer...
If your 2022 Sunset Park and RV Sunray 149 was set up for a Way Interglobal camera system, then it will be their Drive Wireless RV Backup Camera System # 324-000002. This is actually the only camera system Way Interglobal currently offers, so if you camper was set up for use with one of their back-up cameras, you are good to go. view full answer...
I do have some options for you to add a backup camera to your towing setup, but we do not have anything that will tie in directly to the camera system on your 2018 Ford F-150.
The best option would be for you to use the Rear View Safety Wireless Backup Camera System # RVS-4CAM which is wireless and comes with 1 backup camera. I recommend this option because you can add up to 3 more cameras and look at them in a "quad view" on the included 7" monitor. You can add additional cameras with... view full answer...
The Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR, the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System # FR47FR, and the Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR are not compatible with the Voyager WiSight RV Observation Camera # WVH100 you mention.
The Furrion monitors are only compatible with Furrion cameras like the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS05TASF,... view full answer...
For a Wireless 4 Camera System, I recommend the Rear View Safety Wireless Backup Camera System - 7" Quad View Display with Built-in DVR # RVS-4CAM. If you have any aluminum in your trailer system, it can cause interference to wireless connectivity so if you have an aluminum trailer, I recommend you go with a wired system.
For a Wired 4 camera system, I recommend the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710. For a tractor trailer, I recommend... view full answer...
The Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF could pretty easily be used to replace a Voyager Backup Camera System. In order to do this you'd need to remove the Voyager camera and use the existing wires to install the Furrion camera/bracket. The only connectors you'd really need for this are butt connectors, part # DW05745-5. view full answer...
The Furrion Vision S Wireless RV Observation Camera System, # FR98NR that you linked to comes with 3 LED waterproof cameras with night vision; 1 third brake light camera and 2 side marker light cameras that wire to your turn signals and of course the touch screen monitor which can has availability of a 4th camera. You can add a 4th camera with, # FCN48TASF and have it mounted anywhere.
An alternative and my second recommendation, is the Rear View Safety Backup 4 Camera System # RVS-062710... view full answer...
When you want to pair the monitor of the Furrion Vision RV system part # FOS05TASF to another camera go to the menu on the monitor. First select "pairing" then select "rear cam". The system will then search for that camera and show chain link symbol once it is successfully paired next to the camera. I have attached this section of the installation instructions from the camera. view full answer...
Go To Results